|
|
|
|
| |
|
|
|
|
| |
|
3.
|
| 產品: |
Machining Centers |
| Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. collant unit.
8. Spindle chiller.
9. Work lamp.
10. Air blast.
11. Heat exchanger.
12. Tool box with leveling bolts & pads.
13. One set of AGMA operational manual.
14. One set of control operational manual.
Description of optional accessories:
1. Full length enclosure VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
2. CE compliance.
3. EMC compliance
4. 4th axis rotary table.
5. Tilting table.
6. Coolant through spindle (CTS).
7. 6,000 rpm gear driven spindle (50 taper).
8. 8,000 rpm belt driven spindle (50 taper).
9. High pressure coolant pump.
10. Tool probe (renishaw or specified brand).
11. Tool pre-setter.
12. Oil tool block.
13. Graphite machining fixture.
14. Chip conveyer.
15. Optional controller (please specify). |
| 公司: |
[ TW]
Top-One Machinery Co., Ltd.
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
16.
|
| 產品: |
CNC Turning Lathes |
| The LYICO series is a single spindle double turret CNC automatic lathe, integrating many fine features such as high speed, precision construction throughout, proven quality, and high efficiency. Especially ideal for turning various parts, including automotive parts, valves, electronic components and computer components. Other features included are:
(1) 30" slant bed construction. 510mm maximum swing, 320mm maximum turning diameter, 315mm maximum turning length. Easy to remove chips with an ergonomic structural design.
(2) Inside and outside diameters can be cut simultaneously. It saves 1/3~1/2 cutting time over conventional lathes.
(3) Parts catcher is normally applied together with collet chuck and bar feeder for fully automatic operation. This also permits parts to be separated from chips. |
| 公司: |
[ TW]
Jinn Fa Machine industrial Co., Ltd.
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
19.
|
| 產品: |
CNC EDM Machines |
| Generator:
1. Employs 32 bits industrial grade computer for mximum stability, fast execution, and great memory capacity.
2. Employs advanced window display for convenient operation.
3. Automatic traverse and positioning function for three axes.
4. Maximum 1000 positioning holes for each life.
5. Over 8 modes orbiting modes.
6. Z-axis features 10 steps machining and auto change the machining parameters.
7. Parameters such as machine rigidity travel speed, arcing sensitivity, flushing height Chinese / English display and inch / metric can be set as desired.
8. Maximum memory capacity is up to 100 working files. Machining mode (single step or full steps), machining simulation, arcing height, Z-axis compensation, coordinate compensation.
9. 9 sets of home points & 100 sets of machining coodinates.
10. Digital dual voltage (high/low voltage) currents being synchronously discharged to ensure faster metal removal rate, low electrode wear and uniform surface finish.
11. Intelligent arcing auto adjustment functiion: Intelligent arcing sensor & adjust paraments to ensure best performance.
2. New "FUZZY" edition function: just input: (1) material of electrode & workpiece (2) machining depth. (3) bimaximum current & (4) minimum current, the "FUZZY" will auto set the machining parameters for each step from roughing to final finishing. |
| 公司: |
[ TW]
Oscare E.d.m Company Ltd.
|
|
|
|
|
|
| |
|
|
|
|
| |
