產品資訊 - Trailer Plug tool Truck Socket wiring Tester->bathroom equipment

登入

加入會員

求助

Shenzhen Cartrend Technology Co, Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Trailer Plug tool Truck Socket wiring Tester

產品分類 :

美容及家居用品->衛浴用品->衛浴用品->衛浴設備

Trailer Plug tool Truck Socket wiring Tester

產品規格

Model No:	CT0028

Country	CN
Brand	Cartrend
Packing	Carton
Payment Term	L/C,T/T,Paypal,Money Gram,Western Union

產品描述

7 Pin Car Truck Trailer Plug Socket Tester Wiring Circuit Light Test Tool Diagnostic Tools Black


 


This
tester has one side to connect the 7-pins plug of a trailer and another
side to connect the 7-pins socket of a car. This tester indicates
quickly if a failure concerns the wiring of the car or the wiring of the
trailer. 
 
Features: 
Can effectively test what the problem is for 7 pins plug and socket connection. 
Carefully selected materials, frosted surface. 
Cross slotted Copper needles, cooperate with the female pin. 
The cross slotted of size is easier to control. (The size of the a slotted is not stable) 
Safe and dependable performance, reasonable design. Deft appearance, convenient usage. 
 
Specifications: 
Main Material: ABS & Copper 
Color: black 
Item Type: Diagnostic Tools 
Item Name: Trailer Tester 
Size: approx. 20 * 5 * 4cm 
Battery Type: 9V (not included, you need additional purchase) 
Package Size: 20 * 5.5 * 4.5cm / 7.9 * 2.2 * 1.8in 
Package Weight: 194g / 6.8oz 
 
 
Function & guide: 
Trailer (can also be a caravan or bicycle carrier) 
Put the plug in the connection of the tester. 
 Press the yellow button on the side of the tester. 
If the wiring is good, all the LEDs light up. the function of each LED is (acc lso 1724): 
1. left hand indicator (yellow); 
2. foglight or 12V (blue); 
3. mass (white); 
4. right hand indicator (green); 
5. right rearlight (brown); 
6. left brake light (red); 
7. left rearlight (black). Attention: The pin no 2 can be used either for a warning foglamp or a permanent 12V connection. 
 If a LED doesn't light up, it is because the corresponding wire is
defective. If all the LEDs don't light up, then the mass wire is damaged
or all bulbs are defective. 
 
Car, camper 
1. Put the tester in the socket of the car. 
2. Press the yellow button on the side of the tester. 
3. If the wiring is good, all the LEDs light up. Do again steps 4 as previous. 
 
You can also test the functions of each pin of the socket. 
1. Switch on the left hand indicator (after switching on the ignation key). 
2. The corresponding LED must flash with the same frequency. If not, left hand indicator wiring is defective/broken. 
3. Repeat steps 1 and 2 for the right hand indicator, rearlight, foglight and stoplights. 
With a +/- 4 m extension cable, you can test the functions form the driver's seat more easily.


 


Package list:   
1 * 7-Pin Trailer Tester Tool 
1 * English Guide Paper
cartrendthings.com

其他類似產品