產品資訊 - Filtrascale full automatic disc filter for waste watertreatment recycling purification->waste water treatment

登入

加入會員

求助

Chengdu Filtrascale Tech.Co.,Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Filtrascale full automatic disc filter for waste watertreatment recycling purification

產品分類 :

生化科技->環保->廢水處理

Filtrascale full automatic disc filter for waste watertreatment recycling purification

產品規格

Model No:	FC2KA1

Country	CN
Brand	Filtrascale
Materials	Reinforced nylon、 PP
Size	2 inch
Color	black
Packing	wood box
Minimum Order	1 Unit
Payment Term	L/C、TT
Unite flow rate	5-15m3/h
Water consumption	Under 0.5%
Backwashing time	7-15 seconds

產品描述

Specifications
1、Super-speed and backwashing
2、Stable filtration efficiency with different precision（20um、55um、100um，130um、200um、400um）
3、Technical characteristics of accurate filtering and continuous filtration
4、easy operation and assembling, low cost of maintenance
Filtrascale full automatic disc filters using a specially designed disc filtration technology. Thin color-coded polypropylene discs are diagonally grooved on both sides to a specific micron size. A series of these discs are then stacked and compressed on a specially designed spine. When stacked，the groove on top runs opposite the groove below. The stack is enclosed in a corrosion and pressure resistant housing.
During the filtration process, the filtration discs are tightly compressed together by the spring’s power and the differential pressure, thus providing high filtration efficiency. Filtration occurs while water is percolates from the outer diameter to the inner diameter of the element. Depending on the micron rating, there are from 18 (in 400micron discs) to 32 (in 20 micron discs) stopping points in each track, thus creating the unique in-depth filtration.

Filtration Process
1、 The discs are compressed together by both the spring and the pressure difference on the tightening cap, forming a sturdy filter element preventing solids breakthrough.
2、 Inlet water flows into the filter through the filter element
3、 The suspended solids in the water are trapped on and between the discs
Backwashing Process
A command from the control unit to the filter’s inlet valve causes the value to close the filter’ inlet and open the drain.
1、 Filtered outlet water enters from the opposite direction through the outlet port of the filter.
2、 The flaps of the membrane are opened by the water pressure, allowing the water to flow only into the 3 flushing pipes.
3、 The water is forced through nozzles built into the flushing pipes.
4、 Water from the flushing pipes also flows into the piston and pushed the tightening cap up, decompressing the filtration element discs
5、 Tangential jets of water cause fast spinning of the separated discs and remove the trapped solids.
6、 The solids are flushed from the filter to the drain