產品資訊 - SBS basement waterproof membrane->construction materials

登入

加入會員

求助

Cangzhou Jiansheng Building Waterproof Material Co.,Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

SBS basement waterproof membrane

產品分類 :

建築及建材->建築材料

產品規格

Model No:	JD-A001

Country	CN
Brand	JIANDA
Materials	SBS basement waterproof membrane
Size	1m10m2mm
Weight	28kg/roll
Color	black
Packing	In pallet
Minimum Order	100 Square Meter/Square Meters
Payment Term	T/T or L/C
Standard	GB18242-2000
Surface	PE,S,M,AL
Thickness	2-4mm

產品描述

SBS Modified Bitumen Waterproofing Membrane
High quality SBS modified bitumen waterproof membrane

Products Detail

SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane etc.

Characteristic
a)Good impermeability

b)SBS modified bitumen membrane is specially being applied in the cold area with low temperature
c)Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering

d)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.

Applicable scope

Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade I civil building and industrial building which has special waterproofing requirement

Attentions for Construction

Construction shall not be carried out in rain, snow or over 5 degree wind weather; Thereshall be sufficient safety protective facilities in construction site, place firefighting devices according to stipulations

1)Clean the substrate using broom or high pressure dusty cleaner

2)Apply primer

3)Heat the membrane bottom using a high temperature flame gun

4)Push forward while the primer and membrane oil melted

5)Use a roller to push hard the membrane surface to ensure it stick firmly

Technology SBS Technical data Confirming to GB18242-2008

其他類似產品