產品資訊 - FYQ-1 Thickening Intensive Mortar Additive->building materials

登入

加入會員

求助

Hunan Zhenxing Building Materials Science & Technology Co., Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

FYQ-1 Thickening Intensive Mortar Additive

產品分類 :

建築及建材->其他->建材

FYQ-1 Thickening Intensive Mortar Additive

產品規格

Model No:	FYQ-1

Country	CN
Brand	JIUZHI
Materials	Chemical
Size	25kg/bag
Weight	25kg/bag
Color	Grey
Packing	Composite paper profiles outside with plastic bag
Minimum Order	1ton
Payment Term	T/T

產品描述

Brief Introduction:
Thickening intesnsive mortar additive is a kind of powder composite agent, which belongs to the non-air-entraining and non-lime type.It
is safety,non-toxic,no radioactive and no corrosive.It contains materials that have physical absorption to the water molecule,which makes mortar thickening and water-intension.It can totally take the palce of lime paste to be used in constructional mortar for painting ,architectural masonry or others.It is of characteristics of low-consumption and easy-to-use.Its each physical mechanical performance meets the requirements specification.The cohesive ness between mortar and brick or concrete is good and durable.

Usage range:
It can be added into dry or wet mixture mortar to make architectural masonry mortar,plastering mortar, floor mortar, and roofing anti-seepage mortar. And it can be also added in architectural masonry mortar and plastering mortar which applicable to aerated concrete
block etc..

Usage:
1.The mixture ratio of agent to cement is 2%,and there is a measurment spoon in every pack.
2.Mixing procedure while using vertical mixers, horizontal mixers:
Firstely, mix part sand, agent and water and stir them uniformly.Put cement and all sand into them.At last, stir the mixture for 3-5 minutes.
3.Mixing procedure while using drum-type mixeres:Put agent, cement, sand together and stir them for 1 minute.And then add water to the mixtures and stir for 3-5 minutes.
4.The first mixing mortar, the quantity of ageng should be increased 1 time.The water in the mortar with the agent should be reduced by 20%.
5.Artificial mixing:the agent should be first dissovlved into the water then placed into mortar.

其他類似產品