產品資訊 - carbide rod for solid cutting tool(drill,end mill)->Carbide End Mill

登入

加入會員

求助

Zhejiang Dewei Cemented Carbide MFG company

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

carbide rod for solid cutting tool(drill,end mill)

產品分類 :

機械與設備->工具機->銑床->全鎢鋼銑刀

carbide rod for solid cutting tool(drill,end mill)

產品規格

Model No:	NAKE-8

產品描述

Our company specializes in manufacturing a series of extruded
tungsten carbide products,such as:

Carbide Rods, Bar. (h6 Ground/ Blanks, D 0.5-30mm x L 330mm.)
Carbide Tubes
Carbide Strips/rectangles
STB Blanks.

All our carbide rods are made from Extrusion method and HIP Sintered, be of very excellent quality and performances...
Diameter:0.5mm---25.4mm
Length:330mm or cut to length
A) Grade:(YG10X) NK30F
Co 10%
WC: 89%
Others 1% or so
Hardness 92 HRA
TRS>3800N/mm2
Density: 14. 5 g/cm3
Grain Size: 0. 6 micron
Purpose: Fine performance, suitable for processing of non-ferrous metal, plastic materials, carbon fiber, chilled cast iron and heat-resistant alloy steel, etc.

B. ) Grade: YG6X ( NK10F)
Co 6%
WC: 93. 5% or so
Others 0. 5% or so.
Hardness 93 HRA
TRS>3600 N/mm2
Density: 14. 95 g/cm3
Grain Size: 3300 Mpa
Density:14.3 g/cm3
Purpose: Suitable for processing of high-temperature alloy steel, stainless steel, high manganese steel, etc.

Samples and quotations will be given upon receipt of your enquiry.