產品資訊 - Shower door->glass bathroom equipment

登入

加入會員

求助

Zhong Sen Glass

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Shower door

產品分類 :

建築及建材->玻璃->玻璃浴室設備

產品規格

Model No:	SZD

Country	CN
Brand	zhongsen
Materials	Glass
Size	according to customer's requirement
Color	Clear, tinted or follow up customer's requirement
Packing	Wooden crate or according to customer's requirement
Minimum Order	Full container
Payment Term	30% T/T advance, balance before shipment.

產品描述

We can do many sizes according to customer's requirement.

Material:
ABS board toughened glass(5mm)
Toughened glass(5mm)
Aluminum alloy
The shower room is close, won't water leakage.
We install plastic belt (water proof) around the shower room to prevent from the water leakage, no silicon used for seal.

Features:

1. Tempered glass is produced by heating annealed glass in a furnace to 650degree. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
2.4-5 times stronger than annealed glass of the same thickness.
3. Stronger resistance to thermal breakage than annealed or heat strengthened glass
4. If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.
5. Suitable for use as a safety glass as defined by consumer product safety association BS6206: 1981 & EN12150-1
6. Conforms to Austrialia CSI AS/NZS2208. All work done on glass (beveling, cutting, bending, etc) must be done before tempering.
7. Ideal for areas with high wind loads and areas where human contacts is an important consideration, Zhongsen's tempered glass is the perfect option for architects who must meeting building codes and safety requirements. Moreover, it is the only glass strong enough to withstand high levels of thermal stress, a common reason for breakage in building facade glazing units. These safety features also make it an exemplary choice for automotive applications.

Colors
1. Blue
2. Grey
3. Green
4. Bronze
5. Pink
6. Golden
7. Clear etc.

Size
According to customer's requirement.

Thickness
4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm etc.

MOQ
1 FCL

Payment Terms
Within 15 days after deposit or L/C.

Applications
1. External use of windows, doors, shopfronts in offices, houses, shops etc.
2. Interior glass screens, partitions, balustrades etc.
3. Shop display windows, showcases, display shelves etc.
4. Furniture, table-tops, picture frames etc.

其他類似產品

Clear Tempered Shower Enclosure