|
|
 |
Recommended Results |
| |
|
|
| 公司介紹 |
| |
LGC
China Gas ECU & Injection Rail Manufacturer, Complete LPG CNG Conversion Kits Provider
Hongkong LGC Gas Equipment Co., Ltd is a Hongkong registered company, established in 2006 with factory and office in Shenzhen China; dedicated to Bi-fuel (Petrol to CNG/LPG) conversion systems for cars.
As China manufacturer of Gas ECU, Injector Rail and professional provider of Propane/LPG Methane/CNG conversion kits for gasoline cars, LGC provide complete retrofit kits for 3/4/5/6/8 cylinder injection engines, Electronic fuel injection (EFI) engines as well as carburetor cars to convert into bi-fuel system:
LGC provide two types Propane & mehtane system LPG CNG Gas Conversion kits:
1. Propne/LPG Methane/CNG Sequential Injection System kits, suit to EFI cars only:
Much better performance, but more complicated installation and higher price.
Two types: For 3, 4 cylinder Multipoint sequential injection engines and for 5, 6, 8 cylinders.
Complete sequential injection kits include items:
3/4cyl (5/6/8cyl) ECU set—Electronic Control Unit + 3/4cyls (5/6/8cyls) Harness + Micro-switch + Water temperature sensor + (Emulator), Map sensor, (ECU programming cable), (ECU software), CNG sequential reducer/LPG Injection vaporizer (Integrated with CNG/LPG solenoid valve), Gas Injector Rail, CNG pressure gauge, High pressure steel pipe, Gas Filter, Low pressure hoses, Gas filling valves, LPG filling hose, Mounting fittings, Gas tank, Tank brackets, CNG Tank valve/LPG Multivalve (Integrated with LPG level sensor).
2. LPG CNG Mixer System (Normal suction system/traditional system) Conversion Kits, suit to both carburetor and EFI cars:
Simple installation, lower price, but performance not good as sequential injection kits
Complete Normal Suction system kits include items:
CNG reducer/LPG vaporizer (Integrated with LPG/CNG solenoid valve), Gas Emulator, Petrol-gas Changeover Switch (Fuel selector), Air-gas Mixer, power valve,CNG pressure gauge, High pressure steel pipe, Low pressure hoses, Gas filling Valves, LPG filling hose, Mounting fittings, Gas tank, Tank brackets, CNG Tank valve/LPG Multivalve (Integrated with LPG level sensor).
3. The Propane vs methane system Gas Conversion Kits from LGC do not suit to FSI (fuel straight injection) engines, nor diesel engines either.
Other gas conversion items: Ignition timing advance processor, Spark plus special for CNG, Relay for shutting off petrol pump, CNG Gas Leakage Detector/alarm, Lambda Controller and stepper motor.
LGC provide complete solution of Propane/LPG Methane/CNG sequential injection & normal system gas conversion kits for retrofit shops/distributors/DIY end-users, with good quality at cheaper price!
Featured with guaranteed quality & competitive price & excellent service, LGC’s sales network cover the whole China and many oversea markets. Quality of our Gas Kits are favored by lots of installers and distributors.
Company Philosophy
LGC contribute to saving energy and keeping our living environment more green.
Do what we can, do the best, benefit society, benefit the world!
Reputation first, profit second.
LGC History
2006 LGC was established in Shenzhen China, dedicated to LPG CNG autogas Conversion system equipment;
2008 LGC started manufacturing Gas ECU for bi-fuel vehicle, the factory have very good control on quality which has been approved by ECE 67R-01 regulation;
2011 After years of rapid development, LGC had established a wide sales network in China and exported to many oversea markets, focusing on oversea market, endeavor to make LGC well-known in the world;
2012 LGC began mass production of Injector Rail.
Why China, Why LGC?!
1. Choose China--Good quality, good price
As known to all, the autogas conversion products and technology originate from Italy, and spread to others countries included China. With development these years, the autogas technology in China has become mature. Although the RMB-USD exchange rate is dropping, China can still remain its advantage in manufacturing industry, the labor cost is low still and manufacturing ability level is still higher than many other developing countries, which is the guarantee of quality at good price. Choosing "made in China" means that you will get competitive advantage on quality and price.
2. Choose LGC--Your reliant partner, complete solution provider
A full set gas conversion kits include ten above items, there is no a single supplier in the world who can manufacture all items on its own (LGC began manufacturing Gas ECU in 2008, and Injector Rail 2012). If wanted to find original manufacturers for every item you will have to deal with dozen factories!
Since established, LGC worked with many China manufacturer partners before, many of them were eliminated by time, now the remained ones were tested and proved good to us. Good suppliers never mean cheap cheap price only, but balance between quality, price and service: Guaranteed quality at reasonable cost=Lower maintenance charge=Less customer complaint=Reputation and trust in a long term=More buyers, more business=Lower Final Cost in fact! Sustainable Business should be like this! LGC insist on providing you with good quality and perfect service at reasonable cost.
Choose LGC, you won’t need to spend time and energy to verify a dozen of factories/suppliers!
Rely on LGC, save your time and cost!
3. LGC--Perfect combination of Italy technology and made-in-China manufacturing capability
LGC manufacture bi-fuel Gas ECU and injection rail with the most advanced Italy techology, you will be satisfied with Guaranteed quality, Competitive price, Quick response, Continuous Excellent sales service!
Welcome join us in this green business, LGC will do the best to serve you. |
| 相關產品 |
| |
Propane System, methane system, lpg injection system, cng sequential injection kit, methane conversion kit, propane conversion kit, lp gas converter kit, lpg sequential kit, lpg sequential injection system, methane sequential injection kit, cng sequential kit, cng normal kit, lpg suction system, lpg tradtional kit, lpg tradtional system, lpg normal system, ngv injection kit, cng normal suction system, ngv sequential kit, methane injection kit |
| 公司基本資料 |
|
| 公司名稱: |
Hongkong LGC Gas Equipment CoLtd |
| 連絡: |
聯絡我們
|
| 網址: |
********
|
| 電話: |
86-135-37736051 |
| 傳真: |
|
| 國家: |
中國 |
| 住址: |
Rm719A, Huang Jia Centre, Dong Huan Rd 1, Long Hua District, Shenzhen518109, China |
|
| 產品櫥窗 |
|
|
|
|
|
