Suzhou Sealing Technology Co.,Ltd.

登入

加入會員

求助

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. Corrugated Metal Gasket

Corrugated Metal Gasket is processed by metal flat ring into concentric waveform coil by die-pressing, rolling, or turning techniques, with the surface sticking non-metal as expanded graphite or PTFE. Comparing with Kammprofile gasket , the ...

2. Ring joint gasket

Ring Joint Gasket chooses solid metal with kinds of materials, and is mechanically cut and processed into metal sealing gaskets with kinds of forms by high precision NC lathe. It is suitable for the sealing part of pressure container, valve, ...

3. Reinforced graphite gasket

It is cut or punched by pure graphite sheet or metal (truss plate, flat plate, net) reinforced graphite sheet, with mass of excellent sealing performance, e.g.: thermal stability, self-lubricating, no aging, non-fragility, etc. Under extreme ...

4. 金属缠绕垫片

金属缠绕垫片由由预压成型的V形或W形不锈钢带和非金属填充料叠合，螺旋缠绕制作而成。并可根据工况要求添加加强环，因而具有多道密封，耐高温，抗腐蚀，对法兰密封表面粗糙度要求不高等优点。具有良好的压缩回弹性，适用于温度、压力交变剧烈的密封部位，是管道、阀门、泵、换热器、塔、人孔、手孔等法兰连接处的静密封元件。广泛应用于石化、机械、电力、冶金、造船、医药、阀门，原子能和宇航等部门。适用于：蒸气、氢气、天然气、裂解气、油品、酸、碱、盐溶液等。
产品标准：
我们能按照ANSI B 16.20，MSS SP-44，API 605，DIN，JIS，JPI，BS 1560，JG/T，GB/T，HG，SH等标准生产。或者由用户具体注明要求。如垫片用在换热器上且带有筋条时，请提供具体的图纸

5. Spiral Wound Gasket

Spiral Wound Gasket is accumulated, hovered and wound,and spot welded beginning and end terminal by V-shaped or W-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with ...