Microteck Corp. – 線上商品櫥窗

登入

加入會員

求助

Microteck Corp.

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. Max-Flow High Flow Filter Cartridge

Introduction
The Max-Flow High Flow filter is capable for applications of cooling water, Pre-RO, and resin trap filtration. Characterized by large diameter, coreless, single open-ended, pleated cartridge and inside-to-outside flow design, one ...

2. UPK Pleated Filter Cartridge

Specification
Pore size:
(a) Polypropylene : 0.2, 0.45, 1, 5, 10, 20, 40 um
(b) PES Membrane: 0.1, 0.2, 0.45, 1.2 um
(c) PTFE Membrane: 0.2, 0.45, 1, 3, 10 um
Membrane:
(a) 100% Polypropylene Melt-Blown micron fiber
(b) PES (Polyestersulfon ...

3. Max-Pleated High Flow Filter Cartridge

Introduction
The High Capacity Pleated Filter is appropriate for inside existing baskets without hardware changes. It is characterized by higher filter surface area and dirt holding capacity. The inside-out flow design and high capacity pleated ...

4. Cross-Pleated High Flow Filter Cartridge

Specification
Micro Rating: 1, 5,10, 20,30,40 um
Materials of Construction:
Filter Media: 100% PP Melt-blown micro fiber
Inner core: PP
Outer sleeve and End caps : PP
Outer Diameter: 16.5 cm (6.5 inches)
Inner Diameter: 4 cm (1.6 inches)
Leng ...

5. Filter Bag

>Absolute Melt Blow PP Filter Bag
>PP and PE Needle Felt Filter Bag
Effective Removal Ratings:
Polypropylene needlefelt & Polyester needlefelt:
1, 5, 10, 25, 50, 75, 100, 150, 200, 300um
Change out P: 35psi (2.4bar)
Pressure: 70psid ...