|
|
 |
Recommended Results |
| |
|
|
| 公司介紹 |
| |
Brief introduction of product Bio Aramide Fiber::
High Friction Fiber Bio Aramide is a unique composite Bio Fiber (HFF fiber-BA in short) and produced by United Chemindo(email: uchemindo edge yahoo.com) under license RÖTHLER GmbH – Germany.
As the traditional steel fiber type friction material (ie. Semi-metallic friction material) exists some weakness known by people, for example; higher gravity, high hardness; high heat-conductivity, trending to rust, abrasing to brake couple (discord drum), higher cost of steel fiber etc. Since 1990s. People started to research and develop "non-asbestos, non-metallic fiber type friction material" in many countries. At present, it has overall replaced the steel fiber type semi-metallic friction material in many advanced countries in Europe. RÖTHLER GmbH had successfully researched and developed the unique composite Bio Aramide Fiber and in 1998 through German Institute Forschung. After testing and using in over sixty two factories, the product has normally been applied in many friction material manufacturing enterprises and has exported abroad. It is used to manufacture the non-asbestos disc pad and brake lining of automobiles, engineering machines and trains. HFF – BA fiber is a new type of fiber reinforcement for friction material, which is consisted of several fibers and environment friendly, no poison and harmless.
HFF-BA fiber has the following characteristics:
1. The HFF-BA fiber is the unique Synthetic Bio Fiber which are extensively applied in
Industrial fields without public harm.
2. Appearance: Yellow-white color, soft.
3. It can be used in friction material as the primary ingredient of fiber reinforcement. The
reinforcing effect of it can meet the demand of mechanic strength of friction material
products.
4. It can meet the demand of friction characteristics of friction materials.
5. Excellent heat-resistance and reduce noise.
6. Suitable price, obviously cheaper than of steel fiber. The price of HFF fiber is
relatively cheaper among various non-asbestos fibers.
Technical specification
1. Loss of ignition (650°C, one hour) ≤11%.
2. Bulk density: 1.0 ~ 1.2g/cm³.
3. Water content: ≤6%.
Recommended using quantity in friction materials.
4 ~ 7% for drum brake lining
The Benefits of using HFF-BA to the finish product brake lining in comparison with asbestos are :
1. harmless, non toxic and non cancer carrier.
2. better taking hold characteristic in raining and wet
condition.
3. more smooth and it works properly to disc drum and
brake housing.
4. can be used as single fiber material without any
mixing with another fiber.
5. anti block caused the extreme heat by friction
between brake lining/ pad and brake housing / disc
drum.
6. better durability and economical.
|
| 相關產品 |
| |
Brake Lining's Bio Aramide Fiber, Asbestos free fiber, Non Asbestos fiber
|
| 公司基本資料 |
|
| 公司名稱: |
United Chemindo |
| 連絡: |
聯絡我們
|
| 網址: |
********
|
| 電話: |
62-21-92651877 |
| 傳真: |
62-21-+62-251-333.596
|
| 國家: |
印尼 |
| 住址: |
Br. Siang H 5. No.2 |
|
| 產品櫥窗 |
|
|
|
|
|
