沅欣企業股份有限公司 – 線上商品櫥窗

登入

加入會員

求助

沅欣企業股份有限公司

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共6 筆產品

選取全部

全部取消

1. Double Ended Upper & Lower Circular Sawing With Vertical Shaft Machine

1.The picture shown is manual model..
2.Add circular sawing blade to the facilities of the double ends managed trimming, sizing. It can make the cut more even and have no flashes.
3.To add circular sawing blade and vertical shaft to the ...

2. Double Ended Upper & Lower Circular Sawing With Vertical Shaft Machine

3. Double Ended Circular Sawing With Vertical Shaft Machine

1.The picture by shown is for automatic type.
Structure with circular sawing blades and vertical shaft at both ends can finish trimming, sizing, shaping, and mortising only through loading the materials once.
2.The cutting length is from ...

4. Double Ended Circular Sawing Machine

1.The picture by shown is manually operated model.
2.The processing length is 2440mm. Cutting length above 2440mm could be produced upon customer's request.
3.Used by two shaft bearing with circular slidway of rail, feeding material steadily ...

5. RH-422R Double Ended Circular Sawing Machine

1.The picture shown is manual model.
2.The circular sawing blade set at the double ends is used to cut and position lumbers.
Cutting length 3 shaku and 4 shaku is designed for the single rail.
3.Cutting length above 4 shaku is designed ...

6. RH-66A Automatic Double Ended Mortising Machine

1.This machine has upper and lower saw with vertical shaft as itsstructure. It can saw and mortise the two ends of lumbers without flash simultaneously.
2.Adopt cyclic chain for material loading, high efficiency can be obtained.
3.Material ...